banner_page

THS4505DGN

130mA per Channel 4μA 74 dB Instrumentational OP Amps 5.2μA 5V 4.5V~15V ±2.25V~7.5V THS4505 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-THS4505DGN
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
  • Datasheet: -
  • Stock: 544
  • Description: 130mA per Channel 4μA 74 dB Instrumentational OP Amps 5.2μA 5V 4.5V~15V ±2.25V~7.5V THS4505 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Surface Mount YES
Number of Pins 8
Weight 24.408939mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 10MOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Max Power Dissipation 1.71W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number THS4505
Pin Count 8
Operating Supply Voltage 5V
Number of Elements 1
Operating Supply Current 16mA
Nominal Supply Current 20mA
Power Dissipation 1.71W
Max Supply Current 17mA
Slew Rate 1800V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type Differential
Common Mode Rejection Ratio 74 dB
Current - Input Bias 4μA
Max Input Voltage -2.7V
Voltage - Supply, Single/Dual (±) 4.5V~15V ±2.25V~7.5V
Output Current per Channel 130mA
Input Offset Voltage (Vos) 7mV
Bandwidth 260MHz
Gain Bandwidth Product 210MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 210000 kHz
Voltage Gain 54dB
Average Bias Current-Max (IIB) 5.2μA
Power Supply Rejection Ratio (PSRR) 72dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 4mV
Settling Time 20 ns
Low-Bias NO
Micropower NO
-3db Bandwidth 20MHz
Bias Current-Max (IIB) @25C 4.6μA
Programmable Power NO
Dual Supply Voltage 5V
Max I/O Voltage -7mV
Height 1.1mm
Length 3mm
Width 3mm
Thickness 1.02mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

THS4505DGN Overview


Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. Op amps are Differential types of amplifier on the chip. A Tube case is used for delivering the op amp. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. Please take in mind that this instrumentation amplifier should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 7mV. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 16mA . There should be no change in the voltage gain at 54dB. There is a rating of 1 for the operating supply voltage of the buffer op amp. The operating supply voltage of instrumentation amplifier is rated 5V voltage. It is important to keep the resistance within the 10MOhm range of the linear amplifier.

THS4505DGN Features


8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 10MOhm

THS4505DGN Applications


There are a lot of Texas Instruments THS4505DGN Instrumentational OP Amps applications.

  • Professional videography
  • Portable electronic products powered by batteries
  • High-frequency data acquisition systems
  • Digital cameras
  • Power generator
  • Portable media players
  • High speed sample
  • single/dual op amp sum and difference circuits
  • MP3
  • Polarized electrodes

Write a review

Note: HTML is not translated!
    Bad           Good