Parameters |
Programmable Power |
NO |
Input Offset Current-Max (IIO) |
3.6μA |
Height |
1mm |
Length |
3mm |
Width |
3mm |
Thickness |
900μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-VFQFN Exposed Pad |
Number of Pins |
16 |
Weight |
24.097095mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
3.8MOhm |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Base Part Number |
THS4508 |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Number of Channels |
1 |
Operating Supply Current |
39.2mA |
Nominal Supply Current |
42.5mA |
Slew Rate |
6400V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
Differential |
Common Mode Rejection Ratio |
90 dB |
Current - Input Bias |
8μA |
Max Input Voltage |
-2.7V |
Voltage - Supply, Single/Dual (±) |
3.75V~5.25V |
Output Current per Channel |
96mA |
Input Offset Voltage (Vos) |
4mV |
Bandwidth |
2 GHz |
Gain Bandwidth Product |
3GHz |
Unity Gain BW-Nom |
3000000 kHz |
Voltage Gain |
68dB |
Power Supply Rejection Ratio (PSRR) |
90dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
1mV |
Low-Bias |
NO |
Micropower |
NO |
-3db Bandwidth |
300MHz |
THS4508RGTT Overview
The linear amplifier is packaged in a 16-VFQFN Exposed Pad case which makes it easy for the consumer to handle. A Differential-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 16 mark. There are a total of 16 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 16 pins are available on the instrumentation amplifier. Op amp rates 4mV as input offset voltage. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using a supply current of 39.2mA , this buffer op amp will be able to operate. There should be no change in the voltage gain. 1 channels are available on the instrumentation amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. It is used TR to pack the op amps. The op amp resistance should stay within the range of 3.8MOhm.
THS4508RGTT Features
16 Pins
supply voltage of 5V
68dB voltage gain
Resistance of 3.8MOhm
THS4508RGTT Applications
There are a lot of Texas Instruments THS4508RGTT Instrumentational OP Amps applications.
- Communication
- Hand-held batteries
- Proportional counter tubes
- Portable docking station
- High speed sample
- Test and measurement instruments
- Commercial audio systems
- Navigation
- Voltage regulation circuit
- Thermocouples