THS4509RGTT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 24.097095mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 50kOhm |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 2.3W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | THS4509 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 37.7mA |
| Nominal Supply Current | 37.7mA |
| Power Dissipation | 2.3W |
| Slew Rate | 6600V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 8μA |
| Max Input Voltage | -750mV |
| Voltage - Supply, Single/Dual (±) | 3V~5.25V ±1.5V~2.625V |
| Output Current per Channel | 96mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 2 GHz |
| Gain Bandwidth Product | 3GHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 3000000 kHz |
| Voltage Gain | 68dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Supply Voltage Limit-Max | 3V |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 275MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 2.5V |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4509RGTT Overview
A 16-VFQFN Exposed Pad case is used to package the op amp. The instrumentation amplifier in this picture is of the Differential-type. The op amp is delivered to you in a Tape & Reel (TR) case. There have been a total of 16 terminations over the past year. Buffer amplifier has a total of 16 pins. It is important to remember that this op amp should be operated at a voltage of 2.5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 16 pins on it. Regarding input offset voltage, buffer amplifier rates 4mV voltage. This electrical part should be mounted using type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing an 37.7mA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 68dB. There are 1 channels on the operational amplifiers. The operating supply voltage of instrumentation amplifier is rated 5V voltage. For the packing of the instrumentation amplifier, TR is adopted. Instrumentation amplifier resistance should remain within the range of 50kOhm.
THS4509RGTT Features
16 Pins
supply voltage of 2.5V
68dB voltage gain
Resistance of 50kOhm
THS4509RGTT Applications
There are a lot of Texas Instruments THS4509RGTT Instrumentational OP Amps applications.
- Commercial audio systems
- Instrumentation
- Video amplifiers
- PDA
- Power control
- Exponential operation circuits
- Video computer boards
- Multiplication circuits
- Car stereo
- Micro signal measurement
