THS4513RGTT
| Parameters | |
|---|---|
| Base Part Number | THS4513 |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 37.7mA |
| Nominal Supply Current | 40.9mA |
| Power Dissipation | 2.3W |
| Output Current | 96mA |
| Slew Rate | 5100V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 8μA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V ±1.5V~2.75V |
| Output Current per Channel | 96mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 1.6 GHz |
| Gain Bandwidth Product | 2.8GHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 2800000 kHz |
| Voltage Gain | 63dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 3V |
| Voltage - Input Offset | 1mV |
| Settling Time | 16 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 1300MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -3V |
| Max I/O Voltage | 4mV |
| Input Offset Current-Max (IIO) | 3.6μA |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
THS4513RGTT Overview
There is a 16-VFQFN Exposed Pad case package that contains the instrumentation amplifiers. Differential-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations is approaching the 16 mark. It consists of a total of 16 pins in total. Please take in mind that op amp should be run at 2.5V. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 16 pins. As far as the input offset voltage is concerned, linear amplifier rates at 4mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 37.7mA . You should keep the voltage gain at 63dB for the time being. The op amp ic has 1 channels on it. It is used TR to pack the op amps.
THS4513RGTT Features
16 Pins
supply voltage of 2.5V
63dB voltage gain
THS4513RGTT Applications
There are a lot of Texas Instruments THS4513RGTT Instrumentational OP Amps applications.
- Power generator
- Power control
- single/dual op amp sum and difference circuits
- MP3
- Medical instruments
- Portable docking station
- pH (acidity)
- Precision measurement
- Blood pressure sensors
- Car stereo
