THS4521IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | THS4521 |
| Pin Count | 8 |
| Output Type | Differential, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Operating Supply Current | 1.14mA |
| Nominal Supply Current | 1.14mA |
| Slew Rate | 600V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 700nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 95MHz |
| Unity Gain BW-Nom | 95000 kHz |
| Voltage Gain | 119dB |
| Average Bias Current-Max (IIB) | 0.9μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 240μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 145MHz |
| Bias Current-Max (IIB) @25C | 0.9μA |
| Programmable Power | YES |
| Max I/O Voltage | 2mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4521IDR Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 8. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 3.3V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. A total of 8 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing an 1.14mA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 119dB. One of the advantages of this op amp is that it outputs Differential, Rail-to-Rail signals, which is one of its many advantages. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 5V. As a result of this, the buffer amplifier is packed in TR.
THS4521IDR Features
8 Pins
supply voltage of 3.3V
119dB voltage gain
Output Type: Differential, Rail-to-Rail
THS4521IDR Applications
There are a lot of Texas Instruments THS4521IDR Instrumentational OP Amps applications.
- Image computer boards
- Portable docking station
- Power transmission
- Division circuits
- E-book readers
- Hand-held batteries
- Displayers for aircraft and air transportation control systems
- Signal filtering
- High speed sample
- Communication
