THS4522IPW
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | THS4522 |
| Pin Count | 16 |
| Output Type | Differential, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Channels | 2 |
| Operating Supply Current | 1.14mA |
| Nominal Supply Current | 1.14mA |
| Output Current | 100mA |
| Slew Rate | 600V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 700nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 55mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 95MHz |
| Unity Gain BW-Nom | 95000 kHz |
| Voltage Gain | 119dB |
| Average Bias Current-Max (IIB) | 0.9μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 240μV |
| Settling Time | 10 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 145MHz |
| Bias Current-Max (IIB) @25C | 0.9μA |
| Programmable Power | YES |
| Max I/O Voltage | 2mV |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
THS4522IPW Overview
The linear amplifier is packaged in a 16-TSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. An op amp of this type is a Differential-type. The case in which buffer amplifier is delivered is called a Tube case. There have been a total of 16 terminations over the past year. Linear amplifier has a total of 16 pins. It would be helpful if you could remember that this op amp ic should be powered by an 3.3V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 16 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 2mV voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . A supply current of 1.14mA can be used to operate this linear amplifier. 119dB should remain the voltage gain. There are 2 channels on the operational amplifiers. This op amp ic outputs Differential, Rail-to-Rail signals, which is one of the many benefits it has. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. The operating supply voltage of instrumentation amplifier is rated 5V voltage.
THS4522IPW Features
16 Pins
supply voltage of 3.3V
119dB voltage gain
Output Type: Differential, Rail-to-Rail
THS4522IPW Applications
There are a lot of Texas Instruments THS4522IPW Instrumentational OP Amps applications.
- Scintillation detectors
- Video computer boards
- Portable media players
- High speed sample
- Automotive sensors
- Exponential operation circuits
- Laptop
- Portable docking station
- Television broadcasting equipment
- Displayers for aircraft and air transportation control systems
