THS4522IPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | THS4522 |
| Pin Count | 16 |
| Output Type | Differential, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 2 |
| Operating Supply Current | 1.14mA |
| Nominal Supply Current | 1.14mA |
| Slew Rate | 600V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 700nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 95MHz |
| Unity Gain BW-Nom | 95000 kHz |
| Voltage Gain | 119dB |
| Average Bias Current-Max (IIB) | 0.9μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 240μV |
| Settling Time | 10 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 145MHz |
| Bias Current-Max (IIB) @25C | 0.9μA |
| Programmable Power | YES |
| Max I/O Voltage | 2mV |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4522IPWR Overview
There is a 16-TSSOP (0.173, 4.40mm Width) case in which the instrumentation amplifier is packaged. This is a Differential type op amp. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 16. In this case, there are 16 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3.3V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 16 pins are available on the instrumentation amplifier. Op amp ic rates 2mV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. As long as the supply current of the chip does not exceed 1.14mA, this op amp ic can operate. You should keep the voltage gain at 119dB for the time being. This op amp ic has 2 circuits. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Differential, Rail-to-Rail signals. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The instrumentation amplifier is packed in the form of TR.
THS4522IPWR Features
16 Pins
supply voltage of 3.3V
119dB voltage gain
Output Type: Differential, Rail-to-Rail
THS4522IPWR Applications
There are a lot of Texas Instruments THS4522IPWR Instrumentational OP Amps applications.
- Proportional operation circuits
- Video amplifiers
- Medical imaging
- Navigation
- PDA
- Radiation thermometry transducers
- Differentiator circuits
- Ultrasound transducers
- Power generator
- High speed sample
