THS4524IDBTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 38 |
| Weight | 124.000814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | THS4524 |
| Pin Count | 38 |
| Output Type | Differential, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Circuits | 4 |
| Operating Supply Current | 1.14mA |
| Nominal Supply Current | 1.14mA |
| Slew Rate | 600V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 700nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 240μV |
| Bandwidth | 95MHz |
| Unity Gain BW-Nom | 95000 kHz |
| Voltage Gain | 119dB |
| Average Bias Current-Max (IIB) | 0.9μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 145MHz |
| Bias Current-Max (IIB) @25C | 0.9μA |
| Programmable Power | NO |
| Max I/O Voltage | 2mV |
| Number of Amplifiers | 1 |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4524IDBTR Overview
There is a 38-TFSOP (0.173, 4.40mm Width) case package that contains the instrumentation amplifiers. Buffer amps of this type are called Differential-types. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. Linear amplifier has a total of 38 pins. Please take in mind that this instrumentation amplifier should be run at 3.3V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 38 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 240μV. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . An 1.14mA volt supply current is needed for this linear amplifier to operate. Maintain 119dB as the voltage gain. A linear amplifier like this has 4 circuits on it. Buffer amplifier produces Differential, Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 5V. The linear amplifier is packaged by using a TR axis. In total, there are 1 op amps on the device.
THS4524IDBTR Features
38 Pins
supply voltage of 3.3V
119dB voltage gain
Output Type: Differential, Rail-to-Rail
THS4524IDBTR Applications
There are a lot of Texas Instruments THS4524IDBTR Instrumentational OP Amps applications.
- Video computer boards
- Professional videography
- Active probe
- High-frequency data acquisition systems
- Power control
- Addition operation circuits
- single/dual op amp sum and difference circuits
- High speed sample
- Signal transformation
- High/low-pass filter circuit
