THS4531AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | THS4531 |
| Pin Count | 8 |
| Output Type | Differential, Rail-to-Rail |
| Power Supplies | 2.7/5V |
| Number of Channels | 1 |
| Operating Supply Current | 250μA |
| Nominal Supply Current | 250μA |
| Output Current | 50mA |
| Max Supply Current | 250μA |
| Slew Rate | 390V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 36MHz |
| Gain Bandwidth Product | 27MHz |
| Unity Gain BW-Nom | 27000 kHz |
| Voltage Gain | 114dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Power Supply Rejection Ratio (PSRR) | 87dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 2.7MHz |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 36MHz |
| Max I/O Voltage | 400μV |
| Input Offset Current-Max (IIO) | 0.05μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4531AID Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. Differential-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. This linear amplifier should be powered by an 2.7V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 100μV. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . A supply current of 250μA can be used to operate this linear amplifier. It is a member of the 114dB's 114dB family. The op amp ic has 1 channels on it. One of the advantages of this op amp is that it outputs Differential, Rail-to-Rail signals, which is one of its many advantages.
THS4531AID Features
8 Pins
supply voltage of 2.7V
114dB voltage gain
Output Type: Differential, Rail-to-Rail
THS4531AID Applications
There are a lot of Texas Instruments THS4531AID Instrumentational OP Amps applications.
- Signal amplification
- Band-pass filter
- Fast A/D and D/A converters
- Wireless base stations
- Subtraction operation circuits
- Television
- Industrial control system
- Automation control systems
- Biopotential
- Digital cameras
