banner_page

THS4531IDR

25mA per Channel 160nA 90 dB Instrumentational OP Amps 2.5V~5.5V ±1.25V~2.75V THS4531 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-THS4531IDR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 446
  • Description: 25mA per Channel 160nA 90 dB Instrumentational OP Amps 2.5V~5.5V ±1.25V~2.75V THS4531 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.7V
Base Part Number THS4531
Pin Count 8
Output Type Differential, Rail-to-Rail
Number of Elements 1
Power Supplies 2.7/5V
Operating Supply Current 250μA
Nominal Supply Current 250μA
Output Current 50mA
Min Input Voltage 2.5V
Slew Rate 390V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type Differential
Common Mode Rejection Ratio 90 dB
Current - Input Bias 160nA
Max Input Voltage 5.5V
Voltage - Supply, Single/Dual (±) 2.5V~5.5V ±1.25V~2.75V
Output Current per Channel 25mA
Input Offset Voltage (Vos) 200μV
Bandwidth 27MHz
Unity Gain BW-Nom 30000 kHz
Voltage Gain 114dB
Power Supply Rejection Ratio (PSRR) 108dB
Low-Offset NO
Frequency Compensation YES
Settling Time 60 ns
Low-Bias NO
Micropower NO
-3db Bandwidth 36MHz
Bias Current-Max (IIB) @25C 0.29μA
Programmable Power NO
Max I/O Voltage 1mV
Input Offset Current-Max (IIO) 0.05μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

THS4531IDR Overview


There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp ic of the Differential type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 200μV. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using a supply current of 250μA , this buffer op amp will be able to operate. Voltage gain should remain at 114dB. Buffer amplifier produces Differential, Rail-to-Rail signals, which is one of its many benefits. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. It is used TR to pack the op amps.

THS4531IDR Features


8 Pins
supply voltage of 2.7V
114dB voltage gain
Output Type: Differential, Rail-to-Rail

THS4531IDR Applications


There are a lot of Texas Instruments THS4531IDR Instrumentational OP Amps applications.

  • Power control
  • High-frequency data acquisition systems
  • Laptop
  • Exponential operation circuits
  • Inverse/same-phase proportional circuit
  • Comparator
  • Active probe
  • Strain gauges
  • Communication
  • PDA

Write a review

Note: HTML is not translated!
    Bad           Good