THS4532IPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | THS4532 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Differential, Rail-to-Rail |
| Operating Supply Voltage | 2.7V |
| Number of Circuits | 2 |
| Operating Supply Current | 250μA |
| Supply Current-Max | 0.7mA |
| Slew Rate | 390V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 80μV |
| Unity Gain BW-Nom | 27000 kHz |
| Power Supply Rejection Ratio (PSRR) | 108dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Settling Time | 25 ns |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 36MHz |
| Programmable Power | YES |
| Nominal Gain Bandwidth Product | 27MHz |
| Max I/O Voltage | 400μV |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.05μA |
| Voltage Gain-Min | 100000 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4532IPW Overview
In order to protect the op amps, a 16-TSSOP (0.173, 4.40mm Width) case is used. Buffer amps of this type are called Differential-types. The case in which buffer amplifier is delivered is called a Tube case. There have been a total of 16 terminations over the past year. Buffer amplifier has a total of 16 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 16 pins on it. In terms of input offset voltage, operational amplifier rates 80μV. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . You can run this op amp ic on 250μA . There are 2 circuits on op amps. As one of the many benefits of this buffer amplifier, it puts out Differential, Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 2.7V. This operational amplifier can conduct a voltage gain of up to 100000 at a minimum.
THS4532IPW Features
16 Pins
supply voltage of 2.7V
Output Type: Differential, Rail-to-Rail
THS4532IPW Applications
There are a lot of Texas Instruments THS4532IPW Instrumentational OP Amps applications.
- Multiplication circuits
- Information processing
- Industrial applications including automation
- Signal operation
- High-frequency data acquisition systems
- Signal filtering
- Video conversion and routing
- Switching amplifier
- Thermocouples
- Signal transformation
