THS4532IPWR
| Parameters | |
|---|---|
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 80μV |
| Unity Gain BW-Nom | 27000 kHz |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 36MHz |
| Programmable Power | YES |
| Nominal Gain Bandwidth Product | 27MHz |
| Max I/O Voltage | 400μV |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.05μA |
| Voltage Gain-Min | 100000 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | THS4532 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Differential, Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 250μA |
| Supply Current-Max | 0.7mA |
| Slew Rate | 390V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 90 dB |
THS4532IPWR Overview
Packaged in a 16-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 16 terminations. It consists of a total of 16 pins in total. This linear amplifier should be powered by an 2.7V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 16 pins. In terms of input offset voltage, operational amplifier rates 80μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. As long as the supply current of the chip does not exceed 250μA, this op amp ic can operate. There are 2 circuits on op amps. One of its many advantages is that buffer op amp outputs Differential, Rail-to-Rail signals. For the packing of the instrumentation amplifier, TR is adopted. There are a maximum of 100000 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain.
THS4532IPWR Features
16 Pins
supply voltage of 2.7V
Output Type: Differential, Rail-to-Rail
THS4532IPWR Applications
There are a lot of Texas Instruments THS4532IPWR Instrumentational OP Amps applications.
- Portable media players
- Industrial applications including automation
- Instrumentation
- High-frequency data acquisition systems
- Communication
- pH (acidity)
- Signal amplification
- Automatic control
- Television broadcasting equipment
- Weighing systems
