THS4541IRGTT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | THS4541 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 10.1mA |
| Nominal Supply Current | 10.1mA |
| Slew Rate | 1500V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 10μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.4V ±1.35V~2.7V |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 620MHz |
| Gain Bandwidth Product | 850MHz |
| Unity Gain BW-Nom | 850000 kHz |
| Voltage Gain | 119dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 450μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 120MHz |
| Programmable Power | YES |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.5μA |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 125°C |
| Common-mode Reject Ratio-Min | 85 dB |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4541IRGTT Overview
It is packaged in an 16-VFQFN Exposed Pad-case that protects the operational amplifiers from damage. An op amp ic of the Differential type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 16. There are a total of 16 pins on this op amp. Please take in mind that op amp should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 16 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 100μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 10.1mA, this op amp ic can operate. There should be no change in the voltage gain at 119dB. Buffer op amp is equipped with 1 channels on the device. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The instrumentation amplifier is packed in the form of TR.
THS4541IRGTT Features
16 Pins
supply voltage of 5V
119dB voltage gain
Output Type: Rail-to-Rail
THS4541IRGTT Applications
There are a lot of Texas Instruments THS4541IRGTT Instrumentational OP Amps applications.
- Test equipment
- Automation control systems
- Proportional operation circuits
- Displayers for aircraft and air transportation control systems
- Signal filtering
- Subtraction operation circuits
- Gaming industry
- Automatic control
- MP3
- Signal amplification
