THS4631DDA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 2.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | THS4631 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 11.5mA |
| Nominal Supply Current | 13mA |
| Power Dissipation | 2.3W |
| Slew Rate | 1000V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 98mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 210MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 210000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 260μV |
| Low-Bias | YES |
| Micropower | NO |
| -3db Bandwidth | 325MHz |
| Max Frequency | 5MHz |
| Programmable Power | NO |
| Max I/O Voltage | 500μV |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4631DDA Overview
Packaging for the buffer amplifier is in the form of a 8-PowerSOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. A Tube case is used for delivering the op amp. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 500μV. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . You can run this op amp ic on 11.5mA . It is recommended to keep the voltage gain at 80dB at all times. 1 channels are available on the instrumentation amplifier.
THS4631DDA Features
8 Pins
supply voltage of 15V
80dB voltage gain
THS4631DDA Applications
There are a lot of Texas Instruments THS4631DDA Instrumentational OP Amps applications.
- Test and measurement instruments
- Large motor controllers
- Mobile phone
- Navigation
- Band-pass filter
- Blood pressure sensors
- Television broadcasting equipment
- PDA
- Semiconductor detectors
- Non-polarized electrodes
