THS4631DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 2.14W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS4631 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 11.5mA |
| Nominal Supply Current | 13mA |
| Power Dissipation | 2.14W |
| Slew Rate | 1000V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 98mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 325MHz |
| Gain Bandwidth Product | 210MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 210000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 260μV |
| Low-Bias | YES |
| Micropower | NO |
| -3db Bandwidth | 25MHz |
| Max Frequency | 5MHz |
| Programmable Power | NO |
| Max I/O Voltage | 500μV |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4631DGN Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case is used to package the op amp. Buffer amps of this type are called General Purpose-types. Linear amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. This linear amplifier should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 500μV voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 11.5mA, this op amp ic can operate. It is a member of the 80dB's 80dB family. Instrumentation amplifier has 1 channels on it.
THS4631DGN Features
8 Pins
supply voltage of 15V
80dB voltage gain
THS4631DGN Applications
There are a lot of Texas Instruments THS4631DGN Instrumentational OP Amps applications.
- Non-polarized electrodes
- Power transmission
- Automotive sensors
- Exponential operation circuits
- Medical imaging
- Biopotential
- Instrumentation
- Polarized electrodes
- single/dual op amp sum and difference circuits
- Signal transformation
