THS4631DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 2.14W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS4631 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 11.5mA |
| Nominal Supply Current | 13mA |
| Power Dissipation | 2.14W |
| Slew Rate | 1000V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 98mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 210MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 210000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 260μV |
| Low-Bias | YES |
| Micropower | NO |
| -3db Bandwidth | 325MHz |
| Programmable Power | NO |
| Max I/O Voltage | 500μV |
| Wideband | YES |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4631DGNR Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 11.5mA . It is a member of the 80dB's 80dB family. It is possible to count 1 elements on this buffer amplifier. The linear amplifier is packaged by using a TR axis.
THS4631DGNR Features
8 Pins
supply voltage of 15V
80dB voltage gain
THS4631DGNR Applications
There are a lot of Texas Instruments THS4631DGNR Instrumentational OP Amps applications.
- Integrator circuits
- Precision measurement
- Radar
- PDA
- pH (acidity)
- Image computer boards
- Weak signal detection
- Scintillation detectors
- Medical imaging
- Ultrasound transducers
