THS4631DGNRG4
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 2.14W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS4631 |
| Pin Count | 8 |
| Number of Circuits | 1 |
| Operating Supply Current | 11.5mA |
| Nominal Supply Current | 13mA |
| Slew Rate | 1000V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 50pA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 98mA |
| Input Offset Voltage (Vos) | 260μV |
| Gain Bandwidth Product | 210MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 210000 kHz |
| Voltage Gain | 80dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | NO |
| -3db Bandwidth | 325MHz |
| Programmable Power | NO |
| Max I/O Voltage | 500μV |
| Wideband | YES |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
THS4631DGNRG4 Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case is used to package the op amp. This is a General Purpose type op amp. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 8-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 260μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. This op amp can operate from a supply current at 11.5mA. 80dB should be the voltage gain. In total, there are 1 circuits on this buffer amplifier. This linear amplifier pack is based on the TR axis.
THS4631DGNRG4 Features
8 Pins
supply voltage of 15V
80dB voltage gain
THS4631DGNRG4 Applications
There are a lot of Texas Instruments THS4631DGNRG4 Instrumentational OP Amps applications.
- Video data acquisition
- Television
- Scintillation detectors
- Industrial applications including automation
- Radar
- Integrator circuits
- Commercial audio systems
- Measurements of Wheatstone bridge
- E-book readers
- Semiconductor detectors
