THS6012IDWP
| Parameters | |
|---|---|
| Thickness | 2.55mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Driver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 5.8W |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | THS6012 |
| Pin Count | 20 |
| Operating Supply Voltage | 28V |
| Number of Channels | 2 |
| Nominal Supply Current | 26mA |
| Output Current | 500mA |
| Slew Rate | 1300 V/μs |
| Gain Bandwidth Product | 140MHz |
| Differential Output | NO |
| Protocol | DSL |
| Settling Time | 70 ns |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 2/0 |
| Driver Number of Bits | 2 |
| Dual Supply Voltage | 9V |
| Interface Standard | GENERAL PURPOSE |
| Input Bias Current | 12μA |
| Negative Supply Voltage-Nom | -5V |
| Max I/O Voltage | 5mV |
| Supply Voltage1-Nom | 15V |
| Height | 2.65mm |
| Length | 12.82mm |
| Width | 7.52mm |
THS6012IDWP Overview
Due to the enhanced 20-SOIC (0.295, 7.50mm Width) Exposed Pad package, this driver IC is excellent for driving common LEDs.The package of this receiver is Tube.As a Driver can transceiver, this part has enabled many applications to be served.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver requires a 4.5V~16V power supply.As many as 2/0 eligible receivers/drivers can be used simultaneously with this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.This line driver ic can operate efficiently with a supply voltage range of 5V.The integrated terminations of this wide receiver allow it to drive and receive signals from data.The transceiver is packaged with 20 market standard pinouts so that it can be easily used.As the base part number THS6012 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.The driver IC has improved power dissipation control.Using this ic receiver, you were able to achieve a resolution of 2 bits.There are two types of input voltage supply available for this IC, 28V.A temperature above -5V is recommended for the operation of the line driver ic.This optical transceiver consists of a total of 2 channels embedded in it.In this bluetooth transceiver, the output current is rated at 500mA.
THS6012IDWP Features
Tube package
20 pin count
20 pins
2 channels
THS6012IDWP Applications
There are a lot of Texas Instruments THS6012IDWP Drivers/Receivers/Transceivers applications.
- AV receiver
- Clock radio
- High-speed computer links
- Interconnection between switches and computers
- Bridges
- Wireless projection application for conferences
- Fast Ethernet
- Bar, KTV wireless entertainment
- Changeing the frequency from IF to RF
- Fiber optic cable connection network
