THS6022IPWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Driver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 3.3W |
| Technology | BIPOLAR |
| Voltage - Supply | 5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | THS6022 |
| Pin Count | 14 |
| Output Voltage | 25.2V |
| Number of Channels | 2 |
| Nominal Supply Current | 18mA |
| Slew Rate | 1900 V/μs |
| Common Mode Rejection Ratio | 62 dB |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 715MHz |
| Gain Bandwidth Product | 210MHz |
| Differential Output | NO |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| Output Polarity | TRUE |
| Protocol | DSL |
| Settling Time | 70 ns |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 2/0 |
| Driver Number of Bits | 2 |
| Dual Supply Voltage | 9V |
| Interface Standard | GENERAL PURPOSE |
| Input Bias Current | 12μA |
| Negative Supply Voltage-Nom | -15V |
| Max I/O Voltage | 4mV |
| Supply Voltage1-Nom | 15V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS6022IPWP Overview
An excellent driver IC for common LEDs thanks to its enhanced 14-PowerTSSOP (0.173, 4.40mm Width) package.In the Tube package, this receiver is mounted.Several solutions have used this Driver can transceiver in a variety of applications due to its Driver IC nature.Any Surface Mount-type PCB or development board can be used with this wide receiver.Power supply requirements for this differential driver are 5V~15V.At any given time, there can be up to 2/0 eligible receivers/drivers for this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.Wide receiver can operate within the range of 15V supply voltages efficiently.Integrated into this wide receiver are 14 terminations that are used for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.As the base part number THS6022 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.Wide receiver with enhanced power dissipation control, 14-pin.There is a capability of 2-bit resolution with this ic receiver.It is recommended to keep the operating temperature of the line driver ic above -15V.The device is capable of delivering voltage at 25.2V.It is a 2-channel optical transceiver that has been embedded with a single chip.
THS6022IPWP Features
Tube package
14 pin count
14 pins
2 channels
THS6022IPWP Applications
There are a lot of Texas Instruments THS6022IPWP Drivers/Receivers/Transceivers applications.
- Military satellite communications
- VoIP phones
- Precision engineering measurement
- Aircraft positioning
- Metro access rings
- Desktop radio
- Satellite communications networks
- Televisions
- Fiber distributed data interface (FDDI)
- Tuner
