THS6072CD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY |
| Max Power Dissipation | 740mW |
| Technology | BIPOLAR |
| Voltage - Supply | 5V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | THS6072 |
| Pin Count | 8 |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Nominal Supply Current | 4.5mA |
| Slew Rate | 230 V/μs |
| Common Mode Rejection Ratio | 78 dB |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 175MHz |
| Gain Bandwidth Product | 175MHz |
| Differential Output | NO |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Protocol | DSL |
| Settling Time | 43 ns |
| Input Characteristics | DIFFERENTIAL |
| Number of Drivers/Receivers | 0/2 |
| Receiver Number of Bits | 2 |
| Interface Standard | GENERAL PURPOSE |
| Input Bias Current | 6μA |
| Negative Supply Voltage-Nom | -15V |
| Max I/O Voltage | 7mV |
| Supply Voltage1-Nom | 15V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS6072CD Overview
The enhanced 8-SOIC (0.154, 3.90mm Width) package makes it an excellent LED driver.There is a Tube package for this receiver.The Receiver can transceiver type enables this part to be used in a wide range of applications.Any Surface Mount-type PCB or development board can be used with this wide receiver.Power supply requirements for this differential driver are 5V~15V.At any given time, there can be up to 0/2 eligible receivers/drivers for this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.With a supply voltage range of 15V, this line driver ic operates efficiently.This integrated circuit has 8 terminations designed for driving and receiving signals from data.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.THS6072 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.A 8-pin driver IC with enhanced power dissipation control is featured here.In most cases, the receiver will be specified with a 2-bit resolution.There is one driver IC that is designed to operate from a +-5/+-15V power supply, and only one driver IC in total.In addition, the optical transceiver module's ALSO OPERATES AT 9V TO 33V SINGLE SUPPLY function improves signal management accuracy and stability overall.A temperature above -15V is recommended for the operation of the line driver ic.It is a 2-channel optical transceiver that has been embedded with a single chip.
THS6072CD Features
Tube package
8 pin count
8 pins
+-5/+-15V power supply
2 channels
THS6072CD Applications
There are a lot of Texas Instruments THS6072CD Drivers/Receivers/Transceivers applications.
- Data center
- Wireless projection application for business talks
- Routers
- Carrier phase observations
- Military satellite communications
- WDM transmission
- Satellite communication
- LAN, SAN, WAN (local, storage, work area networks)
- Low power, low voltage systems
- Satellite communications networks
