THS7001IPWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| ECCN Code | EAR99 |
| Resistance | 1MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 3.83W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS7001 |
| Pin Count | 20 |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 7mA |
| Power Dissipation | 3.83W |
| Slew Rate | 85V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2.5μA |
| Voltage - Supply, Single/Dual (±) | 9V~32V ±4.5V~16V |
| Output Current per Channel | 95mA |
| Input Offset Voltage (Vos) | 9mV |
| Bandwidth | 70MHz |
| Supply Current-Max (Isup) | 9mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 89dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Voltage - Input Offset | 1mV |
| -3db Bandwidth | 100MHz |
| Dual Supply Voltage | 15V |
| Max I/O Voltage | 7mV |
| Input Voltage Noise Density | 1.7nV/sqrt Hz |
| Number of Amplifiers | 2 |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS7001IPWP Overview
Packaging for the buffer amplifier is in the form of a 20-PowerTSSOP (0.173, 4.40mm Width) case. The instrumentation amplifier in this picture is of the Programmable Gain-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. In total, there are 20 pins on this op amp ic. Please take in mind that op amp should be run at 5V. In more specific terms, this linear amplifier can be categoriOther Analog ICsed as a Other Analog ICs-type device. The buffer op amp includes 20 pins. Regarding input offset voltage, op amp rates 9mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Using an 7mA supply current, this operational amplifier ics can be operated. Op amp is a member of the 89dB's 89dB family. There are 1 channels on the operational amplifiers. It is possible to count 1 elements on this buffer amplifier. During testing, the instrumentation amplifier resistance should remain within a range of 1MOhm. There is also another type of analog IC used in this op amp ic that is called a ANALOG CIRCUIT-type IC. As you can see, the linear amplifier has 2 amplifiers.
THS7001IPWP Features
20 Pins
supply voltage of 5V
89dB voltage gain
Resistance of 1MOhm
THS7001IPWP Applications
There are a lot of Texas Instruments THS7001IPWP Instrumentational OP Amps applications.
- Video amplifiers
- Ultrasound transducers
- Comparator
- Car stereo
- MP3
- Differentiator circuits
- Power transmission
- Power control
- Radiation thermometry transducers
- Computer workstations
