THS7002CPWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 118.501007mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 1MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 4.48W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS7002 |
| Pin Count | 28 |
| Power Supplies | +-5/+-15V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 2 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 7mA |
| Nominal Supply Current | 5.5mA |
| Slew Rate | 85V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2.5μA |
| Max Input Voltage | 16.5V |
| Voltage - Supply, Single/Dual (±) | 9V~32V ±4.5V~16V |
| Output Current per Channel | 95mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 70MHz |
| Supply Current-Max (Isup) | 10mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 89dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Voltage - Input Offset | 1mV |
| -3db Bandwidth | 100MHz |
| Max I/O Voltage | 7mV |
| Input Voltage Noise Density | 1.7nV/sqrt Hz |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS7002CPWP Overview
In order to protect the op amps, a 28-PowerTSSOP (0.173, 4.40mm Width) case is used. This is a Programmable Gain type op amp. Upon delivery, op amp ic is packaged in a Tube case. There is a growing number of terminations approaching the number of 28. Linear amplifier has a total of 28 pins. This linear amplifier should be powered by an 5V battery. There are two types of Other Analog ICs op amps in this case, and this device falls into one of them. There are 28 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 7mA and 10 . It is a member of the 89dB's 89dB family. As far as the device is concerned, buffer amplifier has 2 channels. It is recommended to keep the instrumentation amplifier resistance within the range of 1MOhm. The other types of analog IC are as follwed ANALOG CIRCUIT.
THS7002CPWP Features
28 Pins
supply voltage of 5V
89dB voltage gain
Resistance of 1MOhm
THS7002CPWP Applications
There are a lot of Texas Instruments THS7002CPWP Instrumentational OP Amps applications.
- Instrumentation
- ECG equipment
- Automotive sensors
- Subtraction operation circuits
- Addition operation circuits
- Information processing
- Digital cameras
- Medical imaging
- Inverse/same-phase proportional circuit
- Computer workstations
