THS7002IPWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 120.003531mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 1MOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | THS7002 |
| Pin Count | 28 |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 16.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 2 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 7mA |
| Slew Rate | 85V/μs |
| Amplifier Type | Programmable Gain |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2.5μA |
| Voltage - Supply, Single/Dual (±) | 9V~32V ±4.5V~16V |
| Output Current per Channel | 95mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 70MHz |
| Supply Current-Max (Isup) | 10mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 89dB |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Voltage - Input Offset | 1mV |
| -3db Bandwidth | 100MHz |
| Dual Supply Voltage | 15V |
| Max I/O Voltage | 7mV |
| Input Voltage Noise Density | 1.7nV/sqrt Hz |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS7002IPWP Overview
Packaged in a 28-PowerTSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called Programmable Gain-types. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 28 mark. Buffer amplifier has a total of 28 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Other Analog ICs buffer op amp is what this device is specifically, to be more precise. A total of 28 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 7mA . The voltage gain should stay at 89dB. Instrumentation amplifier has 2 channels on it. The op amp is rated for an operating supply voltage of 2. Instrumentation amplifier resistance should remain within the range of 1MOhm. There is also another type of analog IC used in this op amp ic that is called a ANALOG CIRCUIT-type IC.
THS7002IPWP Features
28 Pins
supply voltage of 5V
89dB voltage gain
Resistance of 1MOhm
THS7002IPWP Applications
There are a lot of Texas Instruments THS7002IPWP Instrumentational OP Amps applications.
- Medical instruments
- Differentiator circuits
- MP3
- Automatic control
- Cinema or auditorium audio system
- Signal operation
- Oscilloscopes
- Video computer boards
- Fast A/D and D/A converters
- Multimedia playback equipment
