THS7368IPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Filter |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.2W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | THS7368 |
| Pin Count | 20 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Supply Voltage-Max (Vsup) | 5V |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 6 |
| Operating Supply Current | 24.5mA |
| Nominal Supply Current | 23.4mA |
| Output Current | 80mA |
| Slew Rate | 125V/μs |
| Voltage - Supply, Single/Dual (±) | 2.6V~5.5V |
| Output Current per Channel | 90mA |
| Supply Type | Single |
| Gain Bandwidth Product | 375MHz |
| Gain | 6 dB |
| -3db Bandwidth | 9.5MHz |
| Consumer IC Type | VIDEO AMPLIFIER |
| Signal to Noise Ratio (SNR) | 70 dB |
| Load Impedance | 150Ohm |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS7368IPW Overview
In the form of a Tube, class d amplifier is packaged.In order to save space, class d amp is included in the package 20-TSSOP (0.173, 4.40mm Width).This amplifier lends itself well to Filter because of its high performance.The PCB is mounted using the Surface Mount method.It has a base part number of THS7368, which allows for easy identification of audio amp.A pin count of 20 can be found on audio digital amplifier.A total of 20 terminations are present.Its -3db bandwidth is 9.5MHz.This audio power amplifier is included in Audio/Video Amplifiers.A supply current of 24.5mA is required to operate the amplifier.20 pins are used to construct amplifier ic.The operating temperature should be less than 85°C.The operating temperature should be at least -40°C.At the present time, there are 6 channels available.VIDEO AMPLIFIER is the type of consumer IC on this amplifier.Mounting is done with Surface Mount.If the supply voltage (Vsup) is above 2.7V, normal operation can be achieved.A maximum supply voltage (Vsup) of 5V is set.There is 80mA output current in this scenario.When audio amplifier ic is in use, it is supplied waudio amplifier ich voltage 3V.As far as its supply type is concerned, it is Single.
THS7368IPW Features
Audio/Video Amplifiers subcategory
20 pins
6 channels
THS7368IPW Applications
There are a lot of Texas Instruments THS7368IPW Video Amps and Modules applications.
- Emergency call (eCall)
- Professional Audio Equipment
- Telematics control unit
- Microphone Preamplifier Circuit
- External Audio Amplifiers
- Car Audio
- Analog and Digital Mixing Consoles
- Body Control Modules
- Aftermarket telematics
- Automotive active noise cancellation
