THS7530PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 3W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | THS7530 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Operating Supply Current | 40mA |
| Power Dissipation | 3W |
| Supply Current-Max | 49mA |
| Slew Rate | 1250V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 20μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Output Current per Channel | 37mA |
| Gain Bandwidth Product | 300MHz |
| Unity Gain BW-Nom | 300000 kHz |
| Voltage Gain | 46.5dB |
| Average Bias Current-Max (IIB) | 40μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 300MHz |
| Bias Current-Max (IIB) @25C | 39μA |
| Programmable Power | YES |
| Input Offset Voltage-Max | 6000μV |
| Wideband | YES |
| Input Voltage Noise Density | 1.1nV/sqrt Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS7530PWPR Overview
A 14-PowerTSSOP (0.173, 4.40mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the Variable Gain-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 14. Buffer amplifier has a total of 14 pins on it. Please take in mind that this instrumentation amplifier should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. There are 14 pins on this chip. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 40mA and 10 . 46.5dB should remain the voltage gain. One of the many benefits of this op amp ic is that it emits Differential signals. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. To pack the operational amplifier ics, TR is adopted as the packing method.
THS7530PWPR Features
14 Pins
supply voltage of 5V
46.5dB voltage gain
Output Type: Differential
THS7530PWPR Applications
There are a lot of Texas Instruments THS7530PWPR Instrumentational OP Amps applications.
- Fission chambers
- Signal transformation
- Signal filtering
- Large motor controllers
- Fast A/D and D/A converters
- PDA
- earphone
- Portable media players
- Home audio systems
- Multiplication circuits
