THS770006IRGER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | ADC Driver |
| Resistance | 115Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Data Acquisition |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | THS770006 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Slew Rate | 3100 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Common Mode Rejection Ratio | 36 dB |
| Gain Bandwidth Product | 2.4 GHz |
| Unity Gain BW-Nom | 2400000 kHz |
| Voltage Gain | 6.25dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 2.2 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 485MHz |
| Programmable Power | YES |
| Input Bias Current | 400μA |
| Max I/O Voltage | 10mV |
| Input Offset Voltage-Max | 5000μV |
| Wideband | YES |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS770006IRGER Overview
Typically, Tape & Reel (TR) packages are used to house items of this kind.There is no doubt that this is an excellent ADC Driver that is very good value for money.As part of the 24-VFQFN Exposed Pad package, it has been dispatched.Mounting is carried out in the Surface Mount direction of the part.Its primary application is Data Acquisition.There is one base part number for this device, and that is THS770006.There are two 1 functions here that are used to gain access to high performance for amplification purposes.24 terminals are in total there, which each have their own function that they perform.During the peak relow process, the iron temperature must be controlled under 260 when the peak relow for the part is being carried out.It is important to note that the part consists of a total of 15 24 pins in total.It is recommended to supply this amplifier with a voltage of 5V in order for it to run properly.24-pin amplifier for custom applications.In order to operate efficiently, the device can withstand temperatures as low as -40°C.It is noteworthy that this part can run at temperatures as high as 85°C, which is impressive.Like any other good-quality Operational Amplifier amplifier, this one provides a marvellous amount of amplifying power.A maximum supply voltage of 5.25V is recommended for this device.Supplied with at least 4.75V power.This video processing device combines 1 channels to achieve amazing performance.5V can be used as a supply for this device.With a voltage gain of 6.25dB of 6.25dB.9, this amplifier achieves excellent results.Power supplies for the part must be 5V-type.The amplifier has a 115Ohm resistance specified.As far as bandwidth performance goes, it is 485MHz for -3db.
THS770006IRGER Features
THS770006IRGER Applications
There are a lot of Texas Instruments THS770006IRGER Special Purpose Amplifiers applications.
- Weighing systems
- Semiconductor detectors
- Blood pressure sensors
- Radar
- pH (acidity)
- RF cable systems
- ECG equipment
- single/dual op amp sum and difference circuits
- Communication
- Computer workstations and wireless base stations
