TIBPAL16L8-15CFN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Weight | 722.005655mg |
| Packaging | Tube |
| Series | IMPACT-X™ PAL® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 50MHz |
| Base Part Number | TIBPAL16L8 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Programmable Type | PAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 6 |
| Nominal Supply Current | 180mA |
| Max Supply Current | 180mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Access Time | 15 ns |
| Output Function | COMBINATORIAL |
| Number of Dedicated Inputs | 10 |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TIBPAL16L8-15CFN Overview
The PLD stock is mounted using Type Surface Mount screws.It has the programmable type of PLD Programmable logic device? PAL.As far as performance-cost ratio is concerned, IMPACT-X? PAL? Series is the best value on the market.Programmable logic devices are widely used in the electronics industry due to Programmable logic array's 20-LCC (J-Lead) package.In Programmable array logic's Packaging, Tube-materials are used.In this PLD stock, TIBPAL16L8 represents the biggest part.Surface Mount is mounted in the way of the PLD.20 remains the pin number for the Complex Programmable logic device.Even at the frequency of 50MHz, it can function accurately.75°C is the current maximum working temperature.The temperature should be higher than 0°C when Programmable logic devices are operating.Only 4.75V volts will work with Programmable logic controller.The PLD can only be operated with a 5.25V supply voltage.6 I/Os are programmable.The Complex Programmable logic device is powered from a source of 5V at all times.Inputs dedicated to the 10 axis are embedded in it.Into it has been programmed a 20 termination.It can be categoriProgrammable Logic Devicesed under the Programmable Logic Devices subcategory.The Programmable logic device is supplied by 5V.In this case, 64 refers to the number of product terms available.A number of 8 outputs are available.You need 5V voltage to operate it.A 20 pin on the board serves a specific purpose.A maximum supply temperature of 180mA can be used.
TIBPAL16L8-15CFN Features
Mounting type of Surface Mount
Maximum temperature of 75°C
6 I/Os
TIBPAL16L8-15CFN Applications
There are a lot of Texas Instruments TIBPAL16L8-15CFN PLDs (Programmable Logic Device) applications.
- Microcomputer systems
- Various types of power-limited applications
- high-performance microcomputer systems
- Battery operated devices
- Electrically Devices
- Programmable Logic Devices
- Power-limited applications
- High performance applications
- High-end communication equipment
- Industrial
