TIBPAL20L8-5CNT
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 1.753503g |
| Packaging | Tube |
| Series | IMPACT-X™ PAL® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | TTL |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 125MHz |
| Base Part Number | TIBPAL20L8 |
| Pin Count | 24 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Programmable Type | PAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 6 |
| Nominal Supply Current | 210mA |
| Max Supply Current | 210mA |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 5.5 ns |
| Access Time | 5 ns |
| Output Function | COMBINATORIAL |
| Number of Dedicated Inputs | 14 |
| Number of Product Terms | 64 |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TIBPAL20L8-5CNT Overview
Type Through Hole mounts the PLD stock.Programmable logic devices are PAL that is programmable.IMPACT-X? PAL? Series provides the best value on the market in terms of performance-cost ratio.Electronics manufacturers use the 24-DIP (0.300, 7.62mm) because of Programmable logic array's package.Programmable array logic's Packaging is made from Tube-materials.In the PLD stock, TIBPAL20L8 corresponds to the largest part.Through Hole is mounted in the way of the PLD.For the Complex Programmable logic device, 24 remains the pin number.The system can still function accurately at 125MHz frequency.As of now, 75°C is the maximum working temperature.When Programmable logic device is in Programmable logic device's operation, it should be warmer than 0°C.A supply voltage of 4.75V volts is necessary for it to function.There is no alternative to the 5.25V supply voltage for this PLD.It has programmable 6 I/Os.The Complex Programmable logic device is powered from a source of 5V at all times.The 14 inputs are embedded into the PLD.There is a 24 termination programmed into it.Several subcategories can be applied to it, including the Programmable Logic Devices category.The supplies of the Programmable logic device is 5V. 64 is the number of product terms.Many 8 outputs exist.It needs 5V voltage to operate.Various 24 pins are located on the board for specific purposes.A maximum supply temperature of 210mA is possible.Among other features, REGISTER PRELOAD; POWER-UP RESET is one.
TIBPAL20L8-5CNT Features
Mounting type of Through Hole
Maximum temperature of 75°C
6 I/Os
TIBPAL20L8-5CNT Applications
There are a lot of Texas Instruments TIBPAL20L8-5CNT PLDs (Programmable Logic Device) applications.
- Microcomputer systems
- high-performance microcomputer systems
- Industrial
- High-speed Devices
- Highly complex logic
- High performance applications
- Battery operated devices
- Programmable Logic Devices
- Low power applications
- Electrically Devices
