TIBPAL20R4-25CNT
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 1.753503g |
| Packaging | Tube |
| Series | IMPACT-X™ PAL® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| Subcategory | Programmable Logic Devices |
| Technology | TTL |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 50MHz |
| Base Part Number | TIBPAL20R4 |
| Pin Count | 24 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Programmable Type | PAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 4 |
| Nominal Supply Current | 105mA |
| Max Supply Current | 105mA |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 25 ns |
| Access Time | 25 ns |
| Output Function | MIXED |
| Number of Dedicated Inputs | 12 |
| Number of Product Terms | 64 |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TIBPAL20R4-25CNT Overview
Mounting is done with the Type Through Hole method.Programmable logic devices are programmable type of PLD Programmable logic device? PAL.Performance-cost ratio makes IMPACT-X? PAL? Series the best value on the market.This 24-DIP (0.300, 7.62mm) package is widely used in the electronics industry.Materials from Tube are used to make the packaging.In the PLD stock, TIBPAL20R4 corresponds to the largest part.There is a Through Hole-mount for the PLD.In the Complex Programmable logic device, 24 represents the pin number.Even at the frequency of 50MHz, it can function accurately.Programmable logic devices are currently possible to work at a maximum temperature of 75°C.In Programmable logic device's operation, it should be warmer than 0°C.4.75Vvolts is the only supply voltage it can handle.The PLD can only be operated with a 5.25V supply voltage.It has programmable 4 I/Os.At all times, the Complex Programmable logic device is powered by 5V.There are 12 dedicated inputs embedded in it.Into it has been programmed a 24 termination.It can be categoriProgrammable Logic Devicesed under the Programmable Logic Devices subcategory.Supplies for the Programmable logic device are 5V.Product terms are counted by 64.Programmable logic devices are possible to output 8 in a number of ways.It requires 5V voltage to operate.A 24 pin on the board serves a specific purpose.The maximum supply temperature is 105mA.One of the additional features is REGISTER PRELOAD; POWER-UP RESET, to name a few.
TIBPAL20R4-25CNT Features
Mounting type of Through Hole
Maximum temperature of 75°C
4 I/Os
TIBPAL20R4-25CNT Applications
There are a lot of Texas Instruments TIBPAL20R4-25CNT PLDs (Programmable Logic Device) applications.
- Power-limited applications
- Electrically Devices
- Battery operated devices
- Programmable Logic Devices
- Highly complex logic
- High performance applications
- high-performance microcomputer systems
- Industrial
- High-speed Devices
- High-end communication equipment
