Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-LCC (J-Lead) |
Number of Pins |
28 |
Weight |
1.182714g |
Packaging |
Tube |
Series |
IMPACT-X™ PAL® |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
Terminal Finish |
Matte Tin (Sn) |
Max Operating Temperature |
75°C |
Min Operating Temperature |
0°C |
Additional Feature |
REGISTER PRELOAD; POWER-UP RESET |
HTS Code |
8542.39.00.01 |
Subcategory |
Programmable Logic Devices |
Technology |
TTL |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
220 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Frequency |
50MHz |
Base Part Number |
TIBPAL20R8 |
Pin Count |
28 |
Number of Outputs |
8 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL EXTENDED |
Programmable Type |
PAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Propagation Delay |
25 ns |
Access Time |
25 ns |
Organization |
12 DEDICATED INPUTS, 0 I/O |
Output Function |
REGISTERED |
Number of Dedicated Inputs |
12 |
Number of Product Terms |
64 |
Height Seated (Max) |
4.57mm |
Length |
11.5062mm |
Width |
11.5062mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
TIBPAL20R8-25CFN Overview
The PLD stock is mounted using Type Surface Mount screws.This PAL type of PLD Programmable logic device? is programmable.Performance-cost ratio makes IMPACT-X? PAL? Series the best value on the market.28-LCC (J-Lead) has a package, so Programmable logic devices are widely used in electronics.Programmable array logic's Packaging is made with Tube-materials.TIBPAL20R8 is the PLD stock's largest Complex Programmable logic device.Surface Mount is the direction in which the PLD is mounted.28 remains the pin number for the Complex Programmable logic device.Even at the frequency of 50MHz, it can function accurately.Current maximum working temperatures are 75°C.When Programmable logic device is operating, it should be warmer than 0°C.Only 4.75V volts will work with Programmable logic controller.Programmable logic devices are only compatible with 5.25V supply voltages.In order to power the Complex Programmable logic device at all times, a source of 5V must be used.A dedicated input for 12 is embedded in the PLD.This PLD is programmed with a 28 termination.A subcategory of Programmable Logic Devices can be applied to it.Programmable logic device 5V has 5V supplies.A product term has a 64 value.Many 8 outputs exist.You need 5V voltage to operate it.A variety of 28 pins are present on the board, each serving a specific purpose.The list of additional features includes REGISTER PRELOAD; POWER-UP RESET, for example.
TIBPAL20R8-25CFN Features
Mounting type of Surface Mount
Maximum temperature of 75°C
TIBPAL20R8-25CFN Applications
There are a lot of Texas Instruments TIBPAL20R8-25CFN PLDs (Programmable Logic Device) applications.
- Low power applications
- High-end communication equipment
- Microcomputer systems
- Industrial
- Software
- Battery operated devices
- Power-limited applications
- High-speed Devices
- Highly complex logic
- Electrically Devices