banner_page

TIBPAL20R8-25CNT

TIBPAL20R8-25CNT datasheet pdf and Embedded - PLDs (Programmable Logic Device) product details from Texas Instruments stock available at Noco


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TIBPAL20R8-25CNT
  • Package: 24-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 604
  • Description: TIBPAL20R8-25CNT datasheet pdf and Embedded - PLDs (Programmable Logic Device) product details from Texas Instruments stock available at Noco(Kg)

Details

Tags

Parameters
Height Seated (Max) 5.08mm
Length 31.64mm
Width 6.73mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Mount Through Hole
Mounting Type Through Hole
Package / Case 24-DIP (0.300, 7.62mm)
Number of Pins 24
Weight 1.753503g
Packaging Tube
Series IMPACT-X™ PAL®
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
Termination Through Hole
ECCN Code EAR99
Max Operating Temperature 75°C
Min Operating Temperature 0°C
Additional Feature REGISTER PRELOAD; POWER-UP RESET
HTS Code 8542.39.00.01
Subcategory Programmable Logic Devices
Technology TTL
Terminal Position DUAL
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 50MHz
Base Part Number TIBPAL20R8
Pin Count 24
Number of Outputs 8
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL EXTENDED
Programmable Type PAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Operating Supply Current 105mA
Max Supply Current 105mA
Propagation Delay 25 ns
Turn On Delay Time 25 ns
Access Time 25 ns
Organization 12 DEDICATED INPUTS, 0 I/O
Output Function REGISTERED
Number of Dedicated Inputs 12
Number of Product Terms 64

TIBPAL20R8-25CNT Overview


The PLD stock is mounted with Type Through Hole screws.There is a programmable type of PLD Programmable logic device? called PAL.The best value on the market can be found in IMPACT-X? PAL? Series' performance-cost ratio.The 24-DIP (0.300, 7.62mm)'s package makes it widely used in electronics.Programmable array logic's Packaging uses Tube-materials.There is a TIBPAL20R8-shaped section on the PLD stock that is Programmable logic array's biggest part.Through Hole is the direction in which the PLD is mounted.There is no change to the pin number for the Complex Programmable logic device, which remains 24.It can still function precisely at 50MHz?frequency.Programmable logic devices are currently 75°C degrees Celsius that can be used as a maximum working temperature.In Programmable logic device's operation, it should be warmer than 0°C.Supply voltage must be 4.75V volts for it to operate.5.25V is the only supply voltage it can work with.At all times, the Complex Programmable logic device is powered by 5V.Inputs dedicated to 12 are embedded in the PLD.The termination is set to 24.There is also the possibility of applying the Programmable Logic Devices subcategory.Programmable logic device supplies are 5V.Product terms are counted by 64.In total, there are numerous 8 outputs.A voltage of 5V is required for Programmable logic array's operation.24 pins on the board are used for specific purposes.It can work with a supply temperature of 105mA at the most.In addition, REGISTER PRELOAD; POWER-UP RESET is among the additional features.Several applications can be performed with the Programmable logic device, thanks to Programmable logic array's ability to operate at any Supply Voltage of 105mA.

TIBPAL20R8-25CNT Features


Mounting type of Through Hole
Maximum temperature of 75°C

TIBPAL20R8-25CNT Applications


There are a lot of Texas Instruments TIBPAL20R8-25CNT PLDs (Programmable Logic Device) applications.

  • High-speed Devices
  • Industrial
  • Programmable Logic Devices
  • Microcomputer systems
  • Low power applications
  • Electrically Devices
  • high-performance microcomputer systems
  • Battery operated devices
  • Software
  • Various types of power-limited applications

Write a review

Note: HTML is not translated!
    Bad           Good