TIBPAL20R8-7CFN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Weight | 1.182714g |
| Packaging | Tube |
| Series | IMPACT-X™ PAL® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 75°C |
| Min Operating Temperature | 0°C |
| Additional Feature | REGISTER PRELOAD; POWER-UP RESET |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Base Part Number | TIBPAL20R8 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL EXTENDED |
| Programmable Type | PAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Propagation Delay | 7.5 ns |
| Access Time | 7 ns |
| Organization | 12 DEDICATED INPUTS, 0 I/O |
| Output Function | REGISTERED |
| Number of Dedicated Inputs | 12 |
| Number of Product Terms | 64 |
| Height Seated (Max) | 4.57mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TIBPAL20R8-7CFN Overview
A Type Surface Mount mount is used to mount the PLD stock.This PAL type of PLD Programmable logic device? is programmable.A high performance-to-cost ratio makes IMPACT-X? PAL? Series the best value on the market.Electronics manufacturers use the 28-LCC (J-Lead) because of Programmable logic array's package.In Programmable array logic's Packaging, Tube-materials are used.In the PLD stock, TIBPAL20R8 corresponds to the largest part.There is a Surface Mount-mount for the PLD.28 remains the pin number for the Complex Programmable logic device.At 100MHz frequency, Programmable logic devices are still capable of performing precisely.Programmable logic devices are currently 75°C degrees Celsius that can be used as a maximum working temperature.It should be warmer when operating than 0°C.Only 4.75V volts will work with Programmable logic controller.It can only work with a 5.25V Supply Voltage.The Complex Programmable logic device is powered from a source of 5V at all times.The board is equipped with 12-dedicated inputs.It has a 28 termination.Programmable Logic Devices subcategory can be applied to it.The Programmable logic device is supplied by 5V.Programmable logic devices are 64 terms that make up the product.Programmable logic devices are possible to output 8 in a number of ways.In order to operate it, 5V voltage is required.A board with 28 pins has specific purposes.A few of the extra features include REGISTER PRELOAD; POWER-UP RESET.
TIBPAL20R8-7CFN Features
Mounting type of Surface Mount
Maximum temperature of 75°C
TIBPAL20R8-7CFN Applications
There are a lot of Texas Instruments TIBPAL20R8-7CFN PLDs (Programmable Logic Device) applications.
- Battery operated devices
- Software
- Various types of power-limited applications
- Programmable Logic Devices
- Low power applications
- Power-limited applications
- high-performance microcomputer systems
- High-end communication equipment
- High performance applications
- Microcomputer systems
