Parameters |
Number of I/O |
10 |
Max Supply Current |
210mA |
Propagation Delay |
7.5 ns |
Turn On Delay Time |
7.5 ns |
Access Time |
7.5 ns |
Number of Gates |
500 |
Output Function |
MACROCELL |
Number of Macro Cells |
10 |
Number of Dedicated Inputs |
11 |
Number of Product Terms |
132 |
Height Seated (Max) |
5.08mm |
Length |
31.64mm |
Width |
6.73mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
24-DIP (0.300, 7.62mm) |
Number of Pins |
24 |
Weight |
1.753503g |
Packaging |
Tube |
Series |
IMPACT-X™ PAL® |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Termination |
Through Hole |
ECCN Code |
3A991.A.2 |
Max Operating Temperature |
75°C |
Min Operating Temperature |
0°C |
HTS Code |
8542.39.00.01 |
Subcategory |
Programmable Logic Devices |
Technology |
TTL |
Terminal Position |
DUAL |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Frequency |
125MHz |
Base Part Number |
PAL22V10 |
Pin Count |
24 |
Number of Outputs |
10 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL EXTENDED |
Programmable Type |
PAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Operating Supply Current |
210mA |
TIBPAL22V10-7CNT Overview
Mounting is done using Type Through Hole.This PAL type of PLD Programmable logic device? is programmable.As far as performance-cost ratio is concerned, IMPACT-X? PAL? Series is the best value on the market.As a result of Programmable logic array's package, the 24-DIP (0.300, 7.62mm) is widely used in electronics.In Programmable array logic's Packaging, Tube-materials are used.There are always macro cells in 10.PAL22V10 represents the largest part of the PLD stock.Through Hole is mounted in the way of the PLD.Pin number 24 remains the same for the Complex Programmable logic device.The 125MHz frequency can still be used precisely.75°C is the current maximum working temperature.The temperature should be higher than 0°C when Programmable logic devices are operating.Only 4.75V volts will work with Programmable logic controller.The PLD can only be operated with a 5.25V supply voltage.10 I/Os can be programmed.At all times, the Complex Programmable logic device is powered by 5V.Inputs dedicated to the 11 axis are embedded in it.In it, a 24 termination has been programmed.Several subcategories can be applied to it, including the Programmable Logic Devices category.Programmable logic device supplies are 5V.In this case, 132 refers to the number of product terms available.A number of 10 outputs are available.It requires 5V voltage to operate.A board with 24 pins has specific purposes.As far as supply temperature is concerned, it can work with a maximum of 210mA.Several applications can be performed with the Programmable logic device, thanks to Programmable logic array's ability to operate at any Supply Voltage of 210mA.There are 500 gates.
TIBPAL22V10-7CNT Features
Mounting type of Through Hole
Maximum temperature of 75°C
10 I/Os
TIBPAL22V10-7CNT Applications
There are a lot of Texas Instruments TIBPAL22V10-7CNT PLDs (Programmable Logic Device) applications.
- high-performance microcomputer systems
- Power-limited applications
- Highly complex logic
- Software
- High performance applications
- Industrial
- Electrically Devices
- Microcomputer systems
- Programmable Logic Devices
- High-end communication equipment