TJM4558CDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TJM4558 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Number of Elements | 2 |
| Power Supplies | +-15V |
| Operating Supply Current | 2.3mA |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 680mW |
| Output Current | 20mA |
| Slew Rate | 2.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 50nA |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 5mV |
| Gain Bandwidth Product | 5.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 5500 kHz |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Max Dual Supply Voltage | 22V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.4μA |
| Programmable Power | NO |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TJM4558CDT Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used for delivering the op amp. In recent months, the number of terminations has approached 8. The pins on this board total to 8 in total. Please take in mind that op amp should be run at 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 8-pin op amp ic is included in the package. The input offset voltage is 5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. You can run this op amp ic on 2.3mA . Voltage gain should remain at 106.02dB. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of instrumentation amplifier is rated 22V voltage. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. As a general rule, you should conduct this electronic component under dual supply voltages of 22V volts.
TJM4558CDT Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
TJM4558CDT Applications
There are a lot of STMicroelectronics TJM4558CDT Instrumentational OP Amps applications.
- Power control
- Television broadcasting equipment
- pH (acidity)
- Portable docking station
- Automotive sensors
- single/dual op amp sum and difference circuits
- Digital cameras
- Image computer boards
- Navigation
- Addition operation circuits
