banner_page

TL022CD

2 Channels 6mA per Channel 100nA 60 dB Instrumentational OP Amps 0.1μA 10V~30V ±5V~15V TL022 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TL022CD
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 545
  • Description: 2 Channels 6mA per Channel 100nA 60 dB Instrumentational OP Amps 0.1μA 10V~30V ±5V~15V TL022 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 15V
Base Part Number TL022
Pin Count 8
Power Supplies +-15V
Number of Channels 2
Operating Supply Current 130μA
Nominal Supply Current 250μA
Power Dissipation 680mW
Slew Rate 0.5V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 60 dB
Current - Input Bias 100nA
Voltage - Supply, Single/Dual (±) 10V~30V ±5V~15V
Output Current per Channel 6mA
Input Offset Voltage (Vos) 5mV
Bandwidth 500 kHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 500 kHz
Voltage Gain 80dB
Average Bias Current-Max (IIB) 0.1μA
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 1mV
Low-Bias NO
Micropower YES
Programmable Power NO
Dual Supply Voltage 9V
Nominal Gain Bandwidth Product 500 kHz
Max I/O Voltage 5mV
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TL022CD Overview


Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. Instrumentation amplifier is a part of Operational Amplifier. The buffer op amp includes 8 pins. Op amp rates 5mV as input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . You can run this op amp ic on 130μA . Voltage gain should remain at 80dB. Buffer op amp is equipped with 2 channels on the device.

TL022CD Features


8 Pins
supply voltage of 15V
80dB voltage gain

TL022CD Applications


There are a lot of Texas Instruments TL022CD Instrumentational OP Amps applications.

  • Wireless base stations
  • Non-polarized electrodes
  • PDA
  • Scintillation detectors
  • Automation control systems
  • Radiation thermometry transducers
  • Video computer boards
  • Signal amplification
  • High input resistance broadband
  • Video data acquisition

Write a review

Note: HTML is not translated!
    Bad           Good