TL022CP

2 Channels 6mA per Channel 100nA 60 dB Instrumentational OP Amps 0.1μA 15V 10V~30V ±5V~15V TL022 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-TL022CP
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 241
Description: 2 Channels 6mA per Channel 100nA 60 dB Instrumentational OP Amps 0.1μA 15V 10V~30V ±5V~15V TL022 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Current - Input Bias	100nA
Voltage - Supply, Single/Dual (±)	10V~30V ±5V~15V
Output Current per Channel	6mA
Input Offset Voltage (Vos)	5mV
Bandwidth	500 kHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	500 kHz
Voltage Gain	80dB
Average Bias Current-Max (IIB)	0.1μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	1mV
Low-Bias	NO
Micropower	YES
Programmable Power	NO
Nominal Gain Bandwidth Product	500 kHz
Max I/O Voltage	5mV
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Number of Functions	2
Supply Voltage	15V
Base Part Number	TL022
Pin Count	8
Operating Supply Voltage	15V
Number of Channels	2
Operating Supply Current	130μA
Nominal Supply Current	250μA
Power Dissipation	680mW
Slew Rate	0.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	60 dB

TL022CP Overview

Packaged in a 8-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. There is a Tube case that is delivered with the instrumentation amplifiers. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are located on this board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 5mV. This electronic component is recommended to be mounted using the mounting type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . An 130μA volt supply current is needed for this linear amplifier to operate. Maintain 80dB as the voltage gain. The op amp ic has 2 channels on it. The operating supply voltage of the buffer op amp is rated at 15V.