TL026CPSR
| Parameters | |
|---|---|
| Nominal Supply Current | 27mA |
| Common Mode Rejection Ratio | 60 dB |
| Voltage - Supply, Single/Dual (±) | ±3V~8V |
| Output Current per Channel | 4mA |
| Bandwidth | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -6V |
| Voltage Gain | 38.59dB |
| Dual Supply Voltage | 6V |
| Input Bias Current | 30μA |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 8 |
| Weight | 120.003531mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Applications | Automatic Gain Control (AGC) |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TL026 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 16V |
| Supply Voltage-Max (Vsup) | 8V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 22mA |
TL026CPSR Overview
A Tape & Reel (TR) is used to package class d amplifier.The 8-SOIC (0.209, 5.30mm Width) package makes class d amp accessible to save space.It is a very good choice for Automatic Gain Control (AGC) due to its high performance.Using the Surface Mount method, audio power amplifier is mounted on the PCB.Due to the use of 1 circuits, audio ic has a greater degree of flexibility.Audio amp can be located using its base part number TL026.A pin count of 8 is present on this amplifier.Digital amplifier consists of 8 terminations.A supply current of 22mA is required to operate the amplifier.Using 8 pins, amplifier ic is constructed.It is recommended to operate at a temperature below 70°C.Minimum operating temperature is 0°C.A total of 1 channels are available at the moment.The 6V supply voltage permits high efficiency.Mounting is accomplished using Surface Mount.It is standard for the supply voltage (Vsup) to be higher than 3V for normal operation.8V refers to the maximum supply voltage (Vsup).When audio amplifier ic is in use, it is supplied waudio amplifier ich voltage 16V.A voltage of 38.59dB is gained by the audio amplifier ic.This audio amp uses an analog IC, which in this case is ANALOG CIRCUIT.
TL026CPSR Features
8 pins
1 channels
TL026CPSR Applications
There are a lot of Texas Instruments TL026CPSR Video Amps and Modules applications.
- HiFi Audio System Equipment
- General-Purpose Amplifier Applications
- Premium Audio
- External Audio Amplifiers
- Preamplification and Filtering
- Body Control Modules
- Microphone Preamplifiers
- Audio Test And Measurement
- High-End A/V Receivers
- Car Audio
