TL032ACDR

40mA per Channel 2pA 75 dB Instrumentational OP Amps 0.0004μA 15V 10V~30V ±5V~15V TL032 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TL032ACDR
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 427
Description: 40mA per Channel 2pA 75 dB Instrumentational OP Amps 0.0004μA 15V 10V~30V ±5V~15V TL032 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	BIFET
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	TL032
Pin Count	8
Operating Supply Voltage	15V
Number of Elements	2
Operating Supply Current	434μA
Nominal Supply Current	560μA
Output Current	40mA
Slew Rate	5.1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	75 dB
Current - Input Bias	2pA
Voltage - Supply, Single/Dual (±)	10V~30V ±5V~15V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	390μV
Bandwidth	1.1MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	1100 kHz
Voltage Gain	81.58dB
Average Bias Current-Max (IIB)	0.0004μA
Low-Offset	NO
Frequency Compensation	YES
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Nominal Gain Bandwidth Product	1.1MHz
Max I/O Voltage	800μV
Power	NO
Input Offset Current-Max (IIO)	0.0001μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL032ACDR Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Cut Tape (CT) case. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, op amp rates 390μV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. An 434μA volt supply current is needed for this linear amplifier to operate. You should keep the voltage gain at 81.58dB for the time being. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The operating supply voltage of instrumentation amplifier is rated 15V voltage. This linear amplifier pack is based on the TR axis.