TL032ACP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TL032 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Operating Supply Current | 434μA |
| Nominal Supply Current | 560μA |
| Output Current | 40mA |
| Slew Rate | 5.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 390μV |
| Bandwidth | 1.1MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1100 kHz |
| Voltage Gain | 81.58dB |
| Average Bias Current-Max (IIB) | 0.0004μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.1MHz |
| Max I/O Voltage | 800μV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL032ACP Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. Buffer amps of this type are called J-FET-types. A Tube case is used for delivering the op amp. It is estimated that there will be 8 terminations in the next few months. In total, there are 8 pins on this op amp ic. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 8 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 390μV. For this electrical component, Through Hole is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Using an 434μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 81.58dB. It is possible to count 2 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 15V.
TL032ACP Features
8 Pins
supply voltage of 5V
81.58dB voltage gain
TL032ACP Applications
There are a lot of Texas Instruments TL032ACP Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Weighing systems
- Professional videography
- Large motor controllers
- Voltage regulation circuit
- earphone
- Mobile phone
- Thermocouples
- Test equipment
- Test and measurement instruments
