Parameters |
Average Bias Current-Max (IIB) |
0.0009μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Low-Bias |
YES |
Micropower |
YES |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
1.1MHz |
Max I/O Voltage |
800μV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.0001μA |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Technology |
BIFET |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TL032 |
Pin Count |
8 |
Operating Supply Voltage |
15V |
Number of Elements |
2 |
Operating Supply Current |
434μA |
Nominal Supply Current |
560μA |
Output Current |
40mA |
Slew Rate |
5.1V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
75 dB |
Current - Input Bias |
2pA |
Voltage - Supply, Single/Dual (±) |
10V~30V ±5V~15V |
Output Current per Channel |
40mA |
Input Offset Voltage (Vos) |
390μV |
Bandwidth |
1.1MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
1100 kHz |
Voltage Gain |
82.61dB |
TL032AIP Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. A J-FET-type buffer amplifier is shown here. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 390μV. For this electrical component, Through Hole is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 434μA . Voltage gain should remain at 82.61dB. There are a total of 2 elements in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 15V voltage.
TL032AIP Features
8 Pins
supply voltage of 5V
82.61dB voltage gain
TL032AIP Applications
There are a lot of Texas Instruments TL032AIP Instrumentational OP Amps applications.
- Automation control systems
- Weighing systems
- Test equipment
- earphone
- Communication
- High input resistance broadband
- Industrial control system
- Computer workstations
- Power control
- Communication device