TL032CD

2 Channels 40mA per Channel 2pA 70 dB Instrumentational OP Amps 0.0004μA 10V~30V ±5V~15V TL032 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TL032CD
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 728
Description: 2 Channels 40mA per Channel 2pA 70 dB Instrumentational OP Amps 0.0004μA 10V~30V ±5V~15V TL032 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	BIFET
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	TL032
Pin Count	8
Power Supplies	+-5/+-15V
Number of Channels	2
Operating Supply Current	434μA
Nominal Supply Current	560μA
Output Current	40mA
Slew Rate	5.1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	70 dB
Current - Input Bias	2pA
Voltage - Supply, Single/Dual (±)	10V~30V ±5V~15V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	570μV
Bandwidth	1.1MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	1100 kHz
Voltage Gain	81.58dB
Average Bias Current-Max (IIB)	0.0004μA
Low-Offset	NO
Frequency Compensation	YES
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Dual Supply Voltage	9V
Nominal Gain Bandwidth Product	1.1MHz
Max I/O Voltage	1.5mV
Power	NO
Input Offset Current-Max (IIO)	0.0001μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL032CD Overview

Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. Op amps are J-FET types of amplifier on the chip. A Tube case is used to deliver the buffer op amp. It is estimated that there will be 8 terminations in the next few months. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. A total of 8 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 570μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Operational amplifier can operate supply current at 434μA. Maintain 81.58dB as the voltage gain. There are 2 channels on the operational amplifiers.