banner_page

TL032CDE4

40mA per Channel 2pA 70 dB Instrumentational OP Amps 0.0004μA 10V~30V ±5V~15V TL032 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TL032CDE4
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 623
  • Description: 40mA per Channel 2pA 70 dB Instrumentational OP Amps 0.0004μA 10V~30V ±5V~15V TL032 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Current - Input Bias 2pA
Voltage - Supply, Single/Dual (±) 10V~30V ±5V~15V
Output Current per Channel 40mA
Input Offset Voltage (Vos) 570μV
Bandwidth 1.1MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 1100 kHz
Voltage Gain 81.58dB
Average Bias Current-Max (IIB) 0.0004μA
Low-Offset NO
Frequency Compensation YES
Low-Bias YES
Micropower YES
Programmable Power NO
Nominal Gain Bandwidth Product 1.1MHz
Max I/O Voltage 1.5mV
Power NO
Input Offset Current-Max (IIO) 0.0001μA
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Contact Plating Gold
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Subcategory Operational Amplifier
Technology BIFET
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Base Part Number TL032
Pin Count 8
Number of Elements 2
Power Supplies +-5/+-15V
Operating Supply Current 434μA
Nominal Supply Current 560μA
Output Current 40mA
Slew Rate 5.1V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type J-FET
Common Mode Rejection Ratio 70 dB

TL032CDE4 Overview


The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the J-FET type. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 570μV. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. A supply current of 434μA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 81.58dB at all times. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer.

TL032CDE4 Features


8 Pins
supply voltage of 5V
81.58dB voltage gain

TL032CDE4 Applications


There are a lot of Texas Instruments TL032CDE4 Instrumentational OP Amps applications.

  • Mobile phone
  • Portable docking station
  • Switching amplifier
  • Medical imaging
  • Video data acquisition
  • Television
  • Proportional counter tubes
  • Test and measurement instruments
  • Polarized electrodes
  • Video conversion and routing

Write a review

Note: HTML is not translated!
    Bad           Good