TL032CDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TL032 |
| Pin Count | 8 |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 434μA |
| Nominal Supply Current | 560μA |
| Output Current | 40mA |
| Slew Rate | 5.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 570μV |
| Bandwidth | 1.1MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1100 kHz |
| Voltage Gain | 81.58dB |
| Average Bias Current-Max (IIB) | 0.0004μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 1.1MHz |
| Max I/O Voltage | 1.5mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL032CDR Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A J-FET-type buffer amplifier is shown here. Linear amplifier is delivered in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 8-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 570μV voltage. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. Using an 434μA supply current, this operational amplifier ics can be operated. Maintain 81.58dB as the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. An buffer amplifier is packed in a TR-shape according to the design.
TL032CDR Features
8 Pins
supply voltage of 5V
81.58dB voltage gain
TL032CDR Applications
There are a lot of Texas Instruments TL032CDR Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Information processing
- Proportional counter tubes
- ECG equipment
- Car stereo
- Portable media players
- Instrumentation
- Signal operation
- Weak signal detection
- Industrial applications including automation
