Parameters |
Terminal Position |
DUAL |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TL032 |
Pin Count |
8 |
Power Supplies |
+-5/+-15V |
Number of Channels |
2 |
Operating Supply Current |
434μA |
Nominal Supply Current |
560μA |
Output Current |
40mA |
Slew Rate |
5.1V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
70 dB |
Current - Input Bias |
2pA |
Voltage - Supply, Single/Dual (±) |
10V~30V ±5V~15V |
Output Current per Channel |
40mA |
Input Offset Voltage (Vos) |
570μV |
Bandwidth |
1.1MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
1100 kHz |
Voltage Gain |
82.61dB |
Average Bias Current-Max (IIB) |
0.0009μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Low-Bias |
YES |
Micropower |
YES |
Programmable Power |
NO |
Dual Supply Voltage |
9V |
Nominal Gain Bandwidth Product |
1.1MHz |
Max I/O Voltage |
1.5mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.0001μA |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Contact Plating |
Gold |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
BIFET |
TL032IP Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. J-FET-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 570μV. This electrical part should be mounted using type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 434μA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 82.61dB at all times. The op amp ic has 2 channels on it.
TL032IP Features
8 Pins
supply voltage of 5V
82.61dB voltage gain
TL032IP Applications
There are a lot of Texas Instruments TL032IP Instrumentational OP Amps applications.
- Multiplication circuits
- Test equipment
- Car stereo
- Communication device
- Mobile phone
- Computer workstations
- Blood pressure sensors
- Biopotential
- Band-pass filter
- High-frequency data acquisition systems