TL034ACN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TL034 |
| Pin Count | 14 |
| Operating Supply Voltage | 15V |
| Number of Elements | 4 |
| Operating Supply Current | 870μA |
| Nominal Supply Current | 1.12mA |
| Output Current | 40mA |
| Slew Rate | 5.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 580μV |
| Bandwidth | 1.1MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1100 kHz |
| Voltage Gain | 81.58dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.1MHz |
| Max I/O Voltage | 1.5mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL034ACN Overview
In the package, you will find a 14-DIP (0.300, 7.62mm)-case to contain the op amp ic. Buffer amps of this type are called J-FET-types. The case in which buffer amplifier is delivered is called a Tube case. There have been a total of 14 terminations over the past year. The total number of pins on linear amplifier is 14. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. A total of 14 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 580μV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. An 870μA volt supply current is needed for this linear amplifier to operate. Keeping the voltage gain at 81.58dB is the best course of action. According to the specifications of the buffer op amp, the operating supply voltage is rated at 4. The operating supply voltage of instrumentation amplifier is rated 15V voltage.
TL034ACN Features
14 Pins
supply voltage of 5V
81.58dB voltage gain
TL034ACN Applications
There are a lot of Texas Instruments TL034ACN Instrumentational OP Amps applications.
- earphone
- Polarized electrodes
- Hand-held batteries
- Automation control systems
- Radar
- Commercial audio systems
- pH (acidity)
- Information processing
- Strain gauges
- Mobile phone
