TL034CN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIFET |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | TL034 |
| Pin Count | 14 |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Operating Supply Current | 870μA |
| Nominal Supply Current | 1.12mA |
| Output Current | 40mA |
| Slew Rate | 5.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 790μV |
| Bandwidth | 1.1MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1100 kHz |
| Voltage Gain | 81.58dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 1.1MHz |
| Max I/O Voltage | 4mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL034CN Overview
Packaged in a 14-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. This is a J-FET type op amp. Linear amplifier is delivered in a Tube case. The number of terminations approaches 14. The total number of pins on linear amplifier is 14. I would like to remind you that this buffer op amp should be powered by an 5V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. There are 14 pins on this chip. Op amp ic rates 790μV for input offset voltage. It is recommended that this electronic component be mounted using the Through Hole mounting type. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. In order for this instrumentation amplifier to operate, the supply current needs to be between 870μA and 10 . The voltage gain should stay at 81.58dB. Instrumentation amplifier has 4 channels on it. The operating supply voltage of the buffer op amp is rated at 15V.
TL034CN Features
14 Pins
supply voltage of 5V
81.58dB voltage gain
TL034CN Applications
There are a lot of Texas Instruments TL034CN Instrumentational OP Amps applications.
- Instrumentation
- Radar
- Video data acquisition
- High speed sample
- Non-polarized electrodes
- Scintillation detectors
- MP3
- High/low-pass filter circuit
- Radiation thermometry transducers
- Medical imaging
