TL052ACDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TL052 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Operating Supply Current | 4.8mA |
| Nominal Supply Current | 5.6mA |
| Slew Rate | 20.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 2.8mV |
| Bandwidth | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3300 kHz |
| Voltage Gain | 95.42dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 400μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 800μV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.001μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL052ACDR Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp ic of the J-FET type. It comes in a Cut Tape (CT) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. A total of 8 pins are located on this board. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 8 pins. Regarding input offset voltage, buffer amplifier rates 2.8mV voltage. This electrical part should be mounted using type Surface Mount. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureUsing an 4.8mA supply current, this operational amplifier ics can be operated. It is a member of the 95.42dB's 95.42dB family. There are a total of 2 elements in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 15V voltage. An buffer amplifier is packed in a TR-shape according to the design.
TL052ACDR Features
8 Pins
supply voltage of 5V
95.42dB voltage gain
TL052ACDR Applications
There are a lot of Texas Instruments TL052ACDR Instrumentational OP Amps applications.
- High input resistance broadband
- Video data acquisition
- Laptop
- Fast A/D and D/A converters
- Multiplication circuits
- Ultrasound transducers
- Fission chambers
- Medical instruments
- Scintillation detectors
- Strain gauges
