TL052CDG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TL052 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Operating Supply Current | 4.8mA |
| Nominal Supply Current | 5.6mA |
| Slew Rate | 20.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 3.2MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3300 kHz |
| Voltage Gain | 95.42dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 650μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 1.5mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.001μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL052CDG4 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. The instrumentation amplifier in this picture is of the J-FET-type. A Tube case is used to deliver the buffer op amp. A total of 8 terminations have been reported in the past few weeks. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 8 pins. Op amp ic rates 3.5mV for input offset voltage. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. This op amp can operate from a supply current at 4.8mA. It is a member of the 95.42dB's 95.42dB family. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of the buffer op amp is rated at 15V.
TL052CDG4 Features
8 Pins
supply voltage of 5V
95.42dB voltage gain
TL052CDG4 Applications
There are a lot of Texas Instruments TL052CDG4 Instrumentational OP Amps applications.
- Video computer boards
- Automotive sensors
- Semiconductor detectors
- Blood pressure sensors
- PDA
- Multimedia playback equipment
- Thermocouples
- Broadcasting
- Power transmission
- Portable media players
