TL054CDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TL054 |
| Pin Count | 14 |
| Number of Elements | 4 |
| Power Supplies | +-5/+-15V |
| Operating Supply Current | 8.4mA |
| Nominal Supply Current | 11.2mA |
| Slew Rate | 17.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 5.5mV |
| Bandwidth | 2.7MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3300 kHz |
| Voltage Gain | 97.15dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 560μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Nominal Gain Bandwidth Product | 2.7MHz |
| Max I/O Voltage | 4mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.001μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL054CDR Overview
It is packaged in an 14-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a J-FET-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 14 mark. Linear amplifier has a total of 14 pins. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 14 pins are included on the operational amplifiers. Op amp ic rates 5.5mV for input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. With regard to operating temperature, this op amp functions well at 0°C~70°C. Operational amplifier can operate supply current at 8.4mA. 97.15dB should be the voltage gain. There is an operating supply voltage rating of 4 for this operational amplifier, which is rated at the manufacturer. TR is adopted to pack the instrumentation amplifier.
TL054CDR Features
14 Pins
supply voltage of 5V
97.15dB voltage gain
TL054CDR Applications
There are a lot of Texas Instruments TL054CDR Instrumentational OP Amps applications.
- Signal amplification
- Gaming industry
- Weak signal detection
- High gain DC amplifier
- Micro signal measurement
- Voltage regulation circuit
- Strain gauges
- Division circuits
- Industrial applications including automation
- Non-polarized electrodes
