TL054CNSR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | TL054 |
| Pin Count | 14 |
| Operating Supply Voltage | 15V |
| Number of Elements | 4 |
| Operating Supply Current | 8.4mA |
| Nominal Supply Current | 11.2mA |
| Slew Rate | 17.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 5.5mV |
| Bandwidth | 2.7MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 3300 kHz |
| Voltage Gain | 97.15dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 560μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 2.7MHz |
| Max I/O Voltage | 4mV |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.001μA |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TL054CNSR Overview
The linear amplifier is packaged in a 14-SOIC (0.209, 5.30mm Width) case. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Cut Tape (CT) case. In recent months, the number of terminations has approached 14. There are a total of 14 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The op amp ic has an array of 14 pins on it. Op amp ic rates 5.5mV for input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges 0°C~70°C. Using an 8.4mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 97.15dB. It is possible to count 4 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 15V voltage. It is used TR to pack the op amps.
TL054CNSR Features
14 Pins
supply voltage of 5V
97.15dB voltage gain
TL054CNSR Applications
There are a lot of Texas Instruments TL054CNSR Instrumentational OP Amps applications.
- Large motor controllers
- Addition operation circuits
- Medical imaging
- High/low-pass filter circuit
- Test and measurement instruments
- Instrumentation
- pH (acidity)
- Communication
- Automatic control
- Signal filtering
